Passzív elemek

PCT
LPIA-20A

Power Inserter

A line power inserter combines RF signal and 60 or 90 volts AC and is placed after a line power supply. It inserts power into the trunk or feeder lines to serve the active modules while providing isolation between the AC and RF networks. The 1.2 GHz frequency rating coupled with outstanding insertion loss and hum modulation characteristics, ensure their reliable performance in the most demanding applications and DOCSIS 3.1 compatibility.

Features:

• 1.2 GHz bandwidth with minimal insertion loss
• 100 dB RFI shielding
• RFI gasket ensures against ingress / egress interference
• Stainless steel hardware for corrosion resistance
• Aluminum alloy housing with weather resistant powder coating
• Weather seal gasket ensures water tight protection, tested at 15 psi

General Specifications:

• Nominal Impedance 75 Ohms
• Power Passing Line Power Inserter: 20 A, 90 VAC (In-Out)
• Waterproof Condition 15 psi
• Surge Withstand All ports conforms to ANSI / SCTE 81 2012,
• IEEE C62.41-1991 Cat. B3 (6000 V, 3000 A, 1.2 / 50 μs to 8 / 20 μs Combination Wave)
• Hum Modulation -60 dB @ 10 A / 65 VAC
• Connector Thread (all ports) 5 / 8-24 UNEF-2B female with red plastic cap
• RFI Shielding -100 dB
• Temperature +20 °C, +60 °C and -40 °C; allow 10%
• Change in performance at +60 °C and -40 °C
• Regulatory Compliance CE, RoHS

 További információ, ajánlat kérése